Sadly up for sale is my 10.3" Wand Plus arm.
This was purchased new from Simon in 2017.
Wiring was upgraded and lengthened by Simon with Nordost Odin 2 in 2018 and terminated with male XLR plugs.
Comes with all original packaging and parts, template tool etc.

The arm is in very clean, near new condition

 For various reason my analogue system has seen very little use in the last five years so time to move things on.

Listing on TM in the next week .

$910 inc freight.

more photos available if needed.  The cast iron pod is available free to any buyer but there will be a freight cost as it weighs around 5 kg.  Could be modified to fit a different TT.

Could you possibly sell the pod separately? I'd be interested depending on it's height?

May 7, 2024 15:49:02 GMT 12 Citroen said:

Could you possibly sell the pod separately? I'd be interested depending on it's height?

Height is 13 cm plus a couple of mil for four gel feet that could be removed.
Diameter is 8 cm.

Height could easily be lowered by a machine shop. The most expensive machining for the spindle, cap and screw is all done.
Weight is just under 5 kg. Once in position it doesn't move.

Hmm, could work.

So it just has a hole in the center for the spindle? And no outlet for tonearm wires, I'm assuming.

There's a spindle hole and a cut out for the boss on the spindle mount plus a tapped thread for the screw that secures the mount.
There is a small tapped hole about half way down the pod for a guide or similar.
I just secured the wire with a cable tie around the pod.

I can take a photo tomorrow if needed.

Think machining cost around $150 so a bit of time and precision work involved.

Price drop on arm to $910.
About as low as I want to go at this time.