Post by Marcus on Aug 30, 2023 8:41:07 GMT 12
Who is the go to person for 401 trouble shooting in Auckland please
Garrard 401 expert required (Auckland)
Post by Citroen on Aug 30, 2023 11:53:06 GMT 12
Cliff
5,471 posts |
Post by tonyd on Aug 30, 2023 16:37:59 GMT 12
What is the problem with the 401?
137 posts |
Post by Marcus on Aug 31, 2023 8:31:23 GMT 12
8 posts |
Post by Marcus on Aug 31, 2023 8:40:28 GMT 12
I get a 30 second spin down with the 2 top bracket screws slightly backed off but I cant get anywhere near that with them screwed down. The resistance from the idler wheel was hammering the Wow and flutter measurements and causing starting problems on 33rpm.
The bush hole is something like 2.3mm and I dont have anything that I can use to align that size. Left to my own devices I will come up with a solution but I figured someone here already has.
8 posts |
Post by Marcus on Aug 31, 2023 9:28:17 GMT 12
OK, I seem to have it sorted. I just spent an hour playing around with the installed height of the top bush and now it is all good. I have my platter at balancing specialists in New Lynn to be rebalanced and that should be back tomorrow.
Cheers
8 posts |
