Post by coleus on Oct 13, 2022 11:25:20 GMT 12
Stereo 60 MkIII KT120 Integrated Amplifier - $2500 PRICE DROP $1500OFF
Ideal for someone wanting a very dynamic fast sound. It has a big power supply, big output transformers.
The MK III design comes with our new “LDT” low distortion transformers, a valve regulated first stage, and a copper alloy top plate.
A special feature is the ability to change the sensitivity of Stereo 60 MKIII at the flick of a switch. Choose between use as either an integrated remote control amplifier, or as a power amplifier fed from a separate pre-amplifier.
The triode sound is preferred by many hi fi fans, but the power is always lower. With our UL/Triode switch you can change from 80 watts to 50 watts of pure triode sound by changing the switch.
May be used as a power amplifier
Comprehensive manual supplied
Remote control supplied
Built in bias & valve test meter
Hand wired point to point
Japanese Blue ALPS volume pot.
Class A, Triode front end
Output circuit Ultralinear or Triode switchable
4x KT150 or KT120
KT88/6550 compatible*
2x 6SL7 first stage valves
2x 6SN7 output driver valves
2x 80 Watts Ultralinear
2x 50 Watts Triode mode
Signal to noise level -90db
Frequency response 20hz-20kHz +0 – 0.5db full power
THD less than 0.05% 1khz
4 and 8 ohm loudspeaker outputs
LDT Tertiary Custom hand wound output transformers
Attractive cover included
Solen Hi Fi quality audio capacitors
Silver PTFE audio cable
Gold plated Input & speaker terminals
Four line inputs
Tape monitor circuit
350mv input sensitivity.(high) 1.2v (low)
220/240volts 200watts typ, 500w max
C E. ROHS.
43cmW, 38D, 23H, 35kg
Ideal for someone wanting a very dynamic fast sound. It has a big power supply, big output transformers.
The MK III design comes with our new “LDT” low distortion transformers, a valve regulated first stage, and a copper alloy top plate.
A special feature is the ability to change the sensitivity of Stereo 60 MKIII at the flick of a switch. Choose between use as either an integrated remote control amplifier, or as a power amplifier fed from a separate pre-amplifier.
The triode sound is preferred by many hi fi fans, but the power is always lower. With our UL/Triode switch you can change from 80 watts to 50 watts of pure triode sound by changing the switch.
May be used as a power amplifier
Comprehensive manual supplied
Remote control supplied
Built in bias & valve test meter
Hand wired point to point
Japanese Blue ALPS volume pot.
Class A, Triode front end
Output circuit Ultralinear or Triode switchable
4x KT150 or KT120
KT88/6550 compatible*
2x 6SL7 first stage valves
2x 6SN7 output driver valves
2x 80 Watts Ultralinear
2x 50 Watts Triode mode
Signal to noise level -90db
Frequency response 20hz-20kHz +0 – 0.5db full power
THD less than 0.05% 1khz
4 and 8 ohm loudspeaker outputs
LDT Tertiary Custom hand wound output transformers
Attractive cover included
Solen Hi Fi quality audio capacitors
Silver PTFE audio cable
Gold plated Input & speaker terminals
Four line inputs
Tape monitor circuit
350mv input sensitivity.(high) 1.2v (low)
220/240volts 200watts typ, 500w max
C E. ROHS.
43cmW, 38D, 23H, 35kg