Post by sub on Nov 26, 2019 18:39:35 GMT 12
many older LP covers start coming apart at the seams, often because the original glue dries out. I have used sellotape from time to time, but if the cover is otherwise near mint, it doesn’t look right. Just wondering what sort of glue would work best?
1,164 posts |
Post by Graham on Nov 26, 2019 19:54:23 GMT 12
Hi Sub. I use woodworking glue which is just thick PVA. Clamp it together for about an hour until set.
616 posts |
Post by Owen Y on Nov 26, 2019 20:16:52 GMT 12
I have simply used a Glue Stick, occasionally.
DarkLantern blog - darklanternforowen.wordpress.com
7,244 posts |
Post by Citroen on Nov 26, 2019 21:04:39 GMT 12
Holdfast Gorilla adhesive or PVA because that's what's on hand, but any all purpose craft glue should work fine.
Cliff
5,495 posts |
Post by michaelw on Nov 26, 2019 21:35:20 GMT 12
i use thin double sided tape.
5,592 posts |
Post by cooksferry on Nov 26, 2019 21:44:10 GMT 12
Used white pva glue for years.
2,432 posts |
Post by sub on Nov 27, 2019 7:04:13 GMT 12
Looks like pva has the most recommendations, and since I always have that in the workshop I will use that.
1,164 posts |
Post by cartridgeguyonline on Nov 27, 2019 15:29:58 GMT 12
White PVA glue here too, used it for years. Does make you appreciate the NZ tip on sleeves though.
941 posts |
